Intensive cleaner for porcelain tiles
- Highly alkaline basic cleaner for microporous floor tiles
- Penetrates into the pores
- High anti-redepositing power
- Very low foaming even when used in higher concentrations
For basic cleaning of alkali and water-resistant tiled floors with smooth, rough or microporous surface, e.g. porcelain tiles and safety tiles. Not suitable for use on linoleum and rubber floors or on calcite-based stones such as marble or terrazzo tiles.
Please test on a small inconspicuous spot before first application. Adjacent areas and objects must be protected.
Basic cleaning (mechanical wet cleaning):
Depending on the degree of soiling, 100‒800 ml to 8 L of cold water.
Distribute the cleaning solution on the floor, leave to react for a short time, scrub, vacuum the dirty solution, rinse thoroughly with water. Use defoamer if excessive foaming occurs in the dirty water tank. Consumption: 3.0‒22.0 ml/m².
Ingredients (according to 648/2004/EC)
Nonionic surfactants < 5%, anionic surfactants 5–15%, dyes, fragrances.
pH value (concentrate): approx. 13
pH value (ready-to-use solution): approx. 11
Surface in m²
Please enter the size of the area.
When entering, only numbers are allowed.
|Basic cleaning (mechanical wet cleaning)||-|