Impran
Stone impregnator
- Penetrates deep into the pores, fast-drying and tread-proof afterwards
- Long-lasting protection for the treated stone surfaces
- Reduces salt efflorescences, moss and algae growth, mould formation and damage caused by weather and frost
- Does not affect the steam permeability of the stone
- Alkali and UV-resistant
- Hydrophobic and oleophobic effect
- Fully hardened after approx. 48 hours
- Free from aromatic hydrocarbons
- Report to DIN 51130 confirming slip-resistance rating R9 available
For the impregnation of natural stone, artificial stone and ceramic floors with porous or absorbent surfaces, e.g. porcelain tiles, marble and granite. Can be used indoors and outdoors.
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| j210465 | Carton of 4 x 2.5 L tin canisters | 54 |
Please test on a small inconspicuous spot before first application. Check for colour changes and colour depth. Ventilate rooms well during and after use. The floor and product temperature must be between 5 °C and 25 °C.
Preparation of the surface:
Surfaces must be free from wax and grease. Only use product on thoroughly cleaned stone surfaces.
Impregnation:
Depending on the absorbency of the surface, 1‒4 layers at intervals of approx. 30 minutes.
Apply the undiluted product to the surface and spread thinly and evenly with a mop. Excess product that has not penetrated into the floor after 15 minutes must be thoroughly and completely removed from the surface using a squeegee. Remove product residue by wiping with a dry mop. Product residue that remains on the surface forms a sticky residue once that cannot be removed anymore once hardened. Consumption: 5.0‒500.0 ml/m².
Consumption depends on the absorbency of the stone surface.
Ingredients
Water-insoluble solvents, impregnation agents.
