Desgoquat
Liquid aldehyde-free disinfectant cleaner concentrate
- EN-certified and VAH/IHO-listed cleaner and disinfectant for surface disinfection
- Effective against gram-positive and gram-negative bacteria (incl. salmonella and listeria), yeasts, mould, non-enveloped and enveloped viruses (virucidal effect, incl. HIV, HBV, HCV, adeno and polio viruses)
- Effective against SARS-CoV-2 (EN 14476)
- Suitable for health and food sectors and for swimming pools
- Alkaline
- Removes grease, oils and proteins
- Free from aldehydes, phenols and organometallic compounds
- Active cleaning and odour-neutral
- The product has a clearance certificate for use in food areas
For the cleaning and disinfection of water and alkali-resistant floor, wall, ceiling and furnishing surfaces in hygiene-relevant sectors. Do not use on alkali-sensitive surfaces or surfaces with a single-component coating. To coat resilient floorings, we recommend our 2-component permanent coating Kiehl-Legnodur-Titan.
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| j350802 | Carton of 6 x 1 L dosing bottles | 84 |
| j350808 | Carton of 3 x 2 L bottles | 130 |
| j350805 | Carton of 2 x 5 L canisters | 56 |
Accessories
| Name | Description | Details |
|---|---|---|
| Printed empty bottle Desgoquat | 500 ml funnel-shaped spray bottle | see more |
Please test on a small inconspicuous spot before first application. 1 dosage = 25 ml.
Preparing the ready-to-use solution:
Always mix the solution with cold water! See table for dosage. Fill the 500 ml foam spray bottle with cold water up to the mark and add 1/2 dosage from the 1 L concentrate bottle or using a Kiehl dosing system (e.g. DosiExpress). Fill the 500 ml foam spray bottle using a suitable Kiehl dosing system (e.g. DosiStation, DosiJet). Use 5 L canister with suitable Kiehl dosing systems (e.g. DosiStation, Arcantec, DosiJet).
Disinfecting cleaning:
Fully cover surface with disinfection solution (approx. 15–20 ml/m²) and clean with a cleaning cloth or cleaning device. Consumption: 0.1 ml/m².
Surfaces and kitchen equipment that come into direct contact with food must be rinsed thoroughly with drinking water once the product has taken effect. For grease or protein deposits, use the product in the appropriate concentration (cold) and, once it has taken effect during scrubbing, apply hot water to the floor surface via the machine’s solution tank.
Ingredients (according to 648/2004/EC)
Nonionic surfactants < 5%, alkalis, complexing agents, biocides.
pH value (concentrate): approx. 13
pH value (ready-to-use solution): approx. 11
Active substances in 100 g:
6.9 g Didecyldimethylammonium chloride (CAS: 7173-51-5).
Registrations
PT 02, PT 04
Recommended dosage for surface disinfection in industrial and institutional areas and food industry
Test method | Spectrum of activity | Organic load | Dosage | Contact time | |
|---|---|---|---|---|---|
EN 16615 / 4-field test Surface disinfection with mechanical action | bactericidal yeasticidal | high | 1% | 100 ml/10 L | 5 min |
EN 14476 Quantitative suspension test | virucidal activity against enveloped viruses | ||||
EN13697 Surface disinfection without mechanical action | bactericidal yeasticidal | high | 4% | 400 ml/10 L | 5 min |
EN 16777 Surface disinfection without mechanical action | virucidal activity against enveloped viruses | ||||
Recommended dosage for surface disinfection in the healthcare sector
Test method | Spectrum of activity | Organic load | Dosage | Contact time | |
|---|---|---|---|---|---|
EN 16615 / 4-field test Surface disinfection with mechanical action | bactericidal yeasticidal | high | 1% | 100 ml/10 L | 5 min |
EN 14476 Quantitative suspension test | virucidal activity against enveloped viruses | ||||
EN 16615 / 4-field test VAH-certified application recommendation for surface disinfection with mechanical action | bactericidal yeasticidal | high | 2% 1% | 200 ml/10 L 100 ml/10 L | 15 min 30 min |
EN 14476 Quantitative suspension test | virucidal activity against enveloped viruses | ||||
EN 13697 Surface disinfection without mechanical action | bactericidal yeasticidal | low | 3% | 300 ml/10 L | 5 min |
EN 16777 Surface disinfection without mechanical action | virucidal activity against enveloped viruses | low | |||
Further tests
Test method | Spectrum of activity | Organic load | Dosage | Contact time | |
|---|---|---|---|---|---|
Medical sector | |||||
EN 16615 / 4-field test VAH-certified application recommendation for surface disinfection with mechanical action | bactericidal yeasticidal | high | 6% 2% 1% | 600 ml/10 L 200 ml/10 L 100 ml/10 L | 5 min 15 min 30 min |
EN 13697 Surface disinfection without mechanical action | bactericidal yeasticidal | high | 3% 1% | 300 ml/10 L 100 ml/10 L | 5 min 60 min |
Industrial and institutional areas, food industry | |||||
EN 16615 Surface disinfection with mechanical action | bactericidal yeasticidal | high | 1% | 100 ml/10 L | 1 min |
fungicidal | low | 4% | 400 ml/10 L | 60 min | |
EN 13697 Surface disinfection without mechanical action | bactericidal | high | 4% 3% 2% | 400 ml/10 L 300 ml/10 L 200 ml/10 L | 1 min 2 min 5 min |
yeasticidal | high | 4% 3% 2% | 400 ml/10 L 300 ml/10 L 200 ml/10 L | 5 min 15 min 30 min | |
Virucidal activity | |||||
EN 14476 Quantitative suspension test | virucidal | high | 5% | 500 ml/10 L | 60 min |
Adenovirus | low | 3% | 300 ml/10 L | 5 min | |
high | 5% | 500 ml/10 L | 5 min | ||
Murine Norovirus (MNV) | low | 2% | 200 ml/10 L | 5 min | |
high | 2% | 200 ml/10 L | 15 min | ||
limited spectrum virucidal activity | low | 3% | 300 ml/10 L | 5 min | |
high | 5% | 500 ml/10 L | 15 min | ||
virucidal activity against enveloped viruses | high | 1% | 100 ml/10 L | 5 min | |
EN 16777 Quantitative surface test | virucidal | low | 5% | 500 ml/10 L | 30 min |
limited spectrum virucidal activity | low | 5% | 500 ml/10 L | 30 min | |
virucidal activity against enveloped viruses | low | 4% 3% 2% | 400 ml/10 L 300 ml/10 L 200 ml/10 L | 1 min 5 min 10 min | |