Ceradur-compact
Metal-salt-free emulsion polish for highly absorbent floorings
- Metal-salt-free, self-shining emulsion polish with high filling capacity
- Outstanding film-forming properties
- Optimum protection of the flooring
- Very good water resistance
- Fast drying
- Easy removal of scuff marks by polishing (approx. 1000 rpm)
- Optimally polishable
- Top stripping without use of a stripper, as part of the intensive cleaning
- Free from TBEP
Can be used on water-resistant, absorbent and coatable floorings, e.g. linoleum or rubber. Please perform an adhesion test before using on floorings with a PU or PE wear layer.
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| j200805 | Carton of 2 x 5 L PCR canisters | 56 |
Please test on a small inconspicuous spot before first application. Do not let the product dry on the mop. Close canister immediately after use. Avoid draughts during use and drying.
Coating:
Depending on the absorbency of the surface, 2‒3 layers at intervals of approx. 30 minutes.
Following stripping or intensive cleaning and a short drying time, apply a thin coat of undiluted product, e.g. using a flat mop or waxer. Consumption: 25.0 ml/m² per application.
Spray buffing for restoring damaged parts of the coating:
Dilute product 1:1 with cold water.
Apply using a spray bottle and polishing machine (approx. 1000 rpm). Consumption: 1.0 ml/m².
Polishing:
Occasional polishing (approx. 1000 rpm) compacts the care components, removes scuff marks caused by traffic and increases durability.
Ingredients
Synthetic dispersions, free from metal salts, polyethylene waxes, additives, softeners, preservatives.
pH value (concentrate): approx. 8
Surface in m²