Thermospeed
High-speed emulsion polish
- Self-shining polymer emulsion
- Outstanding film-forming properties
- Particularly hard-wearing, dirt-repelling, wipe-proof and slip resistant
- Very good water resistance
- Resistant to surface disinfectant products
- Easy removal of scuff marks by polishing (approx. 1000 rpm)
- Optimally polishable
Can be used on water-resistant, coatable, stripped floorings, e.g. PVC, rubber, linoleum, absorbent natural and artificial stone. Please perform an adhesion test before using on floorings with a PU or PE wear layer.
| Art. No. | Packaging unit (PU) | Numbers of PU per pallet |
|---|---|---|
| j200305 | Carton of 2 x 5 L PCR canisters | 56 |
Please test on a small inconspicuous spot before first application. Do not let the product dry on the mop. Close canister immediately after use. Avoid draughts during use and drying.
Coating:
Depending on the absorbency of the surface, 2‒3 layers at intervals of approx. 30 minutes.
Following stripping and a short drying time, apply a thin coat of undiluted product, e.g. using a flat mop or waxer. Consumption: 25.0 ml/m² per application.
Polishing:
Occasional polishing (approx. 1000 rpm) compacts the care components, removes scuff marks caused by traffic and increases durability.
Ingredients
Synthetic dispersions, hard polyethylene waxes, water-soluble solvents, resins, softeners, preservatives.
pH value (concentrate): approx. 8.5
Surface in m²